captin Posted March 24, 2019 Report Share Posted March 24, 2019 I am the proud new owner to a Creative Industries HP wheel. I understand it is not supported by the factory people any more. Is there a PFD of a service manual that someone has. The wheel works well except the pedal does not always stop the wheel. It has to be in the control but I need to how to open it for service... Thanks if you can help me out.... Link to comment Share on other sites More sharing options...
neilestrick Posted March 24, 2019 Report Share Posted March 24, 2019 There's usually just a panel on the control box that can be opened by removing a few screws. There's usually an adjustment in the control box or in the pedal itself where you can set the low end so it shuts off completely. Link to comment Share on other sites More sharing options...
JohnnyK Posted March 25, 2019 Report Share Posted March 25, 2019 Hi Captin and welcome to the Forum... you may just have to open the foot pedal and do some cleaning in there. It has been years since I got into mine, but I think I had a similar problem when I had gotten my CI wheel. Let me know what you find, and if you still have problems, I'll open mine up again and see what gives. I also have a design for a replacement splash pan if you need one. JohnnyK Link to comment Share on other sites More sharing options...
captin Posted March 25, 2019 Author Report Share Posted March 25, 2019 I found it on the control box lid. As I have gone about the repair myself... I adjusted it and the wheel works great. I chosen this Creative Industry wheel over a newer Pacafica wheel just because the size of the motor. JohnnyK my email is demargoix@hotmail.com... Thank you all Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.