Mullins Pottery Posted November 15, 2018 Report Share Posted November 15, 2018 Hi all, I've posted about this local clay body before and I'm checking with the forum to get ideas on trouble shooting another issue. I'm firing to cone 05/04. The body itself is a beautiful lowfire body but after the bisque it gets a white scum on the surface . I'm not sure what it is that's causing the whiting but I think that the clay body would be gallery quality were it not for this blemish. I have sanded the surface after firing and the white can be removed. Obviously this is not a solution but it confirms that there is a beautiful clay body just below the surface. Any ideas of how I can resolve this kind of issue in the clay refining stage? I have links for some images below https://drive.google.com/file/d/0BwDDXHDlS0HGMHVKZVE1VDJuNkUzY2JIbXFFZ2NwMWJ6RHR3/view?usp=sharinghttps://drive.google.com/file/d/0BwDDXHDlS0HGa2Q1LXFkMy1sLVlMaGJBdkE3djN5RUtxNnhJ/view?usp=sharinghttps://drive.google.com/file/d/0BwDDXHDlS0HGMjZQZ1kzb1JnQklZbzc1WExhM1Q2VWVUVjFz/view?usp=sharinghttps://drive.google.com/file/d/0BwDDXHDlS0HGSjFXa2MycWRLcVZwVlJPNWxMM0VYTjlwQ0tn/view?usp=sharing Link to comment Share on other sites More sharing options...
liambesaw Posted November 15, 2018 Report Share Posted November 15, 2018 Probably soluble salts. I know some clay bodies have barium added to mitigate this. Could also be from a lack of oxygen during the bisque. Sometimes my red clay gets like that if I fire too fast with not enough air. Link to comment Share on other sites More sharing options...
neilestrick Posted November 15, 2018 Report Share Posted November 15, 2018 Add 0.5% barium carb to your clay to eliminate scumming. Disperse the barium well in water first or you'll get white specks. Link to comment Share on other sites More sharing options...
Mullins Pottery Posted November 15, 2018 Author Report Share Posted November 15, 2018 Perfect thanks for the info! secondary question for the 300lb that I've already processed and have been aging for several months lol. Any ideas of what i might be able to do to get rid of that after bisque? or do i just need to bite the bullet and start over? I don't have a pugger all this clay is being dried in an inverted perforated metal table outside with sheets for a liner. Winter is just getting started here in southern Utah. Link to comment Share on other sites More sharing options...
liambesaw Posted November 15, 2018 Report Share Posted November 15, 2018 3 minutes ago, Mullins Pottery said: Perfect thanks for the info! secondary question for the 300lb that I've already processed and have been aging for several months lol. Any ideas of what i might be able to do to get rid of that after bisque? or do i just need to bite the bullet and start over? I don't have a pugger all this clay is being dried in an inverted perforated metal table outside with sheets for a liner. Winter is just getting started here in southern Utah. Does the scum stick around after the glaze firing? I suppose it probably does since your clay is a lowfire one. It doesn't on my cone 6 stuff. Link to comment Share on other sites More sharing options...
Mullins Pottery Posted November 15, 2018 Author Report Share Posted November 15, 2018 I've fired it to 04 and cone 10 so I haven't fired any other temps to test. At cone 10 the clay turns black and has no sign of scumming. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.