Claypot Posted October 2, 2018 Report Share Posted October 2, 2018 I have the opportunity to purchase a small electric kiln branded as "Nova P" does anybody know anything about this kiln or where I can get information on it please? My intention would be to use it for small pieces for bisque firing and perhaps for mid-fire glaze firings. Link to comment Share on other sites More sharing options...
neilestrick Posted October 2, 2018 Report Share Posted October 2, 2018 Are you sure the kiln is model P, or is that the model of the sitter? There should be a serial plate on the kiln that says model, voltage, phase, etc. There is little to no information about Nova kilns on the internet. Someone on the forum had one a couple of years ago, and it was a funky little thing with elements embedded in the fiber walls. My general recommendation is to avoid kilns that are no longer made unless you're sure you can get parts for them. Link to comment Share on other sites More sharing options...
karenkstudio Posted October 2, 2018 Report Share Posted October 2, 2018 I posted the picture of the NOVA kiln. There is no way to gradually turn up the temperature. It's the type of kiln that is plugged into a regular outlet, and was probably intended for glass fusing and china painting. I only use it reheat pieces for horsehair raku and like the fact that the elements are covered. I use a sight cone system to determine temp. I don't think it would be practical for bisque. I've never glazed anything in this kiln. Mine only cost $25 so I thought it would worth having for some of my experiments. The picture of the kiln is in my gallery. Link to comment Share on other sites More sharing options...
karenkstudio Posted October 2, 2018 Report Share Posted October 2, 2018 found the picture of the nova kiln. Link to comment Share on other sites More sharing options...
Claypot Posted November 28, 2018 Author Report Share Posted November 28, 2018 On 10/3/2018 at 12:14 AM, karenkstudio said: I posted the picture of the NOVA kiln. There is no way to gradually turn up the temperature. It's the type of kiln that is plugged into a regular outlet, and was probably intended for glass fusing and china painting. I only use it reheat pieces for horsehair raku and like the fact that the elements are covered. I use a sight cone system to determine temp. I don't think it would be practical for bisque. I've never glazed anything in this kiln. Mine only cost $25 so I thought it would worth having for some of my experiments. The picture of the kiln is in my gallery. Hi, karenkstudio. Thank you for your response. I like your idea of using it to heat pots for horsehair firing. Apologies for not responding sooner. Link to comment Share on other sites More sharing options...
Claypot Posted November 28, 2018 Author Report Share Posted November 28, 2018 On 10/2/2018 at 10:46 PM, neilestrick said: Are you sure the kiln is model P, or is that the model of the sitter? There should be a serial plate on the kiln that says model, voltage, phase, etc. There is little to no information about Nova kilns on the internet. Someone on the forum had one a couple of years ago, and it was a funky little thing with elements embedded in the fiber walls. My general recommendation is to avoid kilns that are no longer made unless you're sure you can get parts for them. Good advice. Thank you. Link to comment Share on other sites More sharing options...
nchanted Posted May 11, 2019 Report Share Posted May 11, 2019 Hi Karin, did you buy the kiln? Last year I bought a Nova Model KL22320 and I have the operating instructions and parts list. You can have a copy if you are interested. I have never used my kiln. I've just started a pottery class, I'm guessing my little kiln might not be suitable for pottery. I'm interested though in the "horse hair" firing. Link to comment Share on other sites More sharing options...
Hand & Wheel Posted July 18, 2019 Report Share Posted July 18, 2019 Hi Nchanted, I have just inherited a Nova Kiln, the same model as yours. Have you had any luck with it? Im hoping I will be able to use it for biscuit firings. I would love to get a copy of your user manual if possible. Link to comment Share on other sites More sharing options...
PeterH Posted July 18, 2019 Report Share Posted July 18, 2019 Is this of any help? http://aakilns.com.au/pdf/novaman1.pdf 1st page is Link to comment Share on other sites More sharing options...
EvilBunny doll Posted September 1, 2020 Report Share Posted September 1, 2020 I've somehow fell into making porcelain dolls I'm just starting out an have all the supplies but one thing I didn't have was a kiln I finally got one it's a small one but hoping it will work.its a nova kiln . im improvising of course cuz im on a low budget I have a bisque piece firing as we speak cross ur fingers pray this works I wanted to add pics but it wont let me for some reason.all i can do is share my experience hope i get positive feed back or help someone else. Link to comment Share on other sites More sharing options...
neilestrick Posted September 1, 2020 Report Share Posted September 1, 2020 @EvilBunny doll Welcome to the forum! Let us know how the firing turns out. Link to comment Share on other sites More sharing options...
Sue M Posted August 8, 2022 Report Share Posted August 8, 2022 I just inherited a small NOVA Series No 225 Kiln. I can't find anything on how to operate this. It is very small, table top. How and what is this use for?? Link to comment Share on other sites More sharing options...
Bill Kielb Posted August 8, 2022 Report Share Posted August 8, 2022 @Sue M As above, I think this is your manual https://aakilns.com.au/pdf/novaman1.pdf Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.