Slip for coating/firing dried flowers?
Posted 08 May 2013 - 12:11 PM
I've been asked to see if it's possible to slip and fire a wedding bouquet of flowers. I'm somewhat familiar with firing slip-soaked fabrics (like crochet, fabric, stuffed animals, etc) - and that's fairly simple since the cotton will soak up slip no problemo - but dried flowers is a bit different since there really isn't any mass to absorb the slip, and they are so fragile. I was thinking some sort of slip containing calcined clay and pyrophyllite might get me in the right direction. I already tried a few attempts with a casting slip and a brush-on slip, but I wouldn't really call them successful. I think flower-type has a lot to do with it, but planning to experiment more with some various dried flowers i've got laying around to make sure it works before messing up her actual bouquet. Next attempt will be to do a quick dip to get into the crevices and then layer more with a sprayer.
Just wanted to see if anyone has tips on where to go next since I know slip-drenched fabrics are very common, but not so much flowers.
Posted 08 May 2013 - 02:42 PM
Posted 08 May 2013 - 09:06 PM
If you are able to somehow get this to work, please let us know how you did it.
Dry Ridge Pottery
Posted 09 May 2013 - 09:45 AM
You could also mold each flower with layers of liquid latex, crush the flower, empty and wash the mold then fill will porcelain slip??
I would also quote a very high price and get a 50% deposit with the understanding that it is for your time spent solving this and not refundable.
Contemporary Fine Colored Porcelain
TRY ... FAIL ... LEARN ... REPEAT
" ... If a sufficient number of people are different, no one has to be normal"
Posted 09 May 2013 - 10:00 AM
Posted 09 May 2013 - 01:36 PM
my initial tests were with some dried mullein and lavender flowers, simply dipped/soaked in a white slip -- results were so so and I think it only worked as well as it did because those types of flowers don't have much in terms of "petals" and are more resilient from damaging. I haven't yet tried something like a rose, which I'm guessing might just disintegrate on contact with slip.
like i stated before, my next test will be to do a quick dip in thinned out slip to get it deep into the core, then add more layers with a sprayer and see how this works out. I think what I need to find is a slip recipe for high-strength in thin applications, so it's not quite so fragile once finished. I haven't worked a whole lot with slips, but IIRC it's pyrophyllite that will give it more strength??? i will definitely give some white terra sig a try - i think the small particle size will help a lot.
the actual bouquet of question doesn't have your traditional flowers in it (like roses), I'll have to check again and see what's in it, but I know there are items like artichoke and thistle flowers in it. Perhaps I'll have to dry out some of the artichokes from my garden instead of having them for dinner this weekend
Posted 09 May 2013 - 03:59 PM
Dry Ridge Pottery
Posted 14 April 2016 - 09:15 AM
I just came across this thread, while exploring some options related to slip decoration with flowers. And I wondered what did you finally do about that wedding bouquet back in 2013?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users