AndyL Posted December 21, 2012 Report Share Posted December 21, 2012 I've a friend that I want to surprise by making some ornaments for. They'll be for the Christmas 2014 holidays. I'm looking for sources of molds although I will make some myself. Can anyboy suggest mold sources from the USA or Canada? Link to comment Share on other sites More sharing options...
justanassembler Posted December 21, 2012 Report Share Posted December 21, 2012 I've a friend that I want to surprise by making some ornaments for. They'll be for the Christmas 2014 holidays. I'm looking for sources of molds although I will make some myself. Can anyboy suggest mold sources from the USA or Canada? try this Link to comment Share on other sites More sharing options...
Wind n Wing Posted December 21, 2012 Report Share Posted December 21, 2012 I used to do alot of poured low fire pieces in days gone by. Some of the mold companies you should look up are Dona, Riverview, Duncan and Alberta plus Doc Holiday. They all carry a good selection of ornament molds. Hope this helps. RJ Link to comment Share on other sites More sharing options...
Nelly Posted December 22, 2012 Report Share Posted December 22, 2012 I used to do alot of poured low fire pieces in days gone by. Some of the mold companies you should look up are Dona, Riverview, Duncan and Alberta plus Doc Holiday. They all carry a good selection of ornament molds. Hope this helps. RJ Dear Dona, While I have not done poured molds, what I have done and they have been a hit have been the old cookie cutter slab decorations. Know that while they seem simple enough, they do take time if you want to do them well and people will pay for them. It is also kind of an interesting glaze test experiments (i.e., different types of clay/old recycled clay of the same general body, use of different slips, mixing glaze experiments etc.). After they are fired there can be significant refining of the edges if you haven't done this prior to firing. I also ensure that each of my pieces are done with some really good ribbon I would buy in a specialty shop. These can then be simply hung on any type of tree (i.e., one of those wire ones or even a branch) and you are good to go. They sell well at shows. People always want to come to your booth and go away with something. I know this doesn't helps you find molds but it is a last minute idea. Also, I have noticed on the Pottery Supply House web-site a listing for some old molds in the past. You may want to watch this site for people who are selling old molds and/or supplies. I watch this fairly frequently as you never know what you will find. Good luck, Nancy Link to comment Share on other sites More sharing options...
Isculpt Posted December 28, 2012 Report Share Posted December 28, 2012 I used to do alot of poured low fire pieces in days gone by. Some of the mold companies you should look up are Dona, Riverview, Duncan and Alberta plus Doc Holiday. They all carry a good selection of ornament molds. Hope this helps. RJ Dear Dona, While I have not done poured molds, what I have done and they have been a hit have been the old cookie cutter slab decorations. Know that while they seem simple enough, they do take time if you want to do them well and people will pay for them. It is also kind of an interesting glaze test experiments (i.e., different types of clay/old recycled clay of the same general body, use of different slips, mixing glaze experiments etc.). After they are fired there can be significant refining of the edges if you haven't done this prior to firing. I also ensure that each of my pieces are done with some really good ribbon I would buy in a specialty shop. These can then be simply hung on any type of tree (i.e., one of those wire ones or even a branch) and you are good to go. They sell well at shows. People always want to come to your booth and go away with something. I know this doesn't helps you find molds but it is a last minute idea. Also, I have noticed on the Pottery Supply House web-site a listing for some old molds in the past. You may want to watch this site for people who are selling old molds and/or supplies. I watch this fairly frequently as you never know what you will find. Good luck, Nancy The "Pottery Supply House" website sounds interesting. I Googled "Pottery Supply House" but found nothing. Can you provide a url? Link to comment Share on other sites More sharing options...
bciskepottery Posted December 29, 2012 Report Share Posted December 29, 2012 I used to do alot of poured low fire pieces in days gone by. Some of the mold companies you should look up are Dona, Riverview, Duncan and Alberta plus Doc Holiday. They all carry a good selection of ornament molds. Hope this helps. RJ Dear Dona, While I have not done poured molds, what I have done and they have been a hit have been the old cookie cutter slab decorations. Know that while they seem simple enough, they do take time if you want to do them well and people will pay for them. It is also kind of an interesting glaze test experiments (i.e., different types of clay/old recycled clay of the same general body, use of different slips, mixing glaze experiments etc.). After they are fired there can be significant refining of the edges if you haven't done this prior to firing. I also ensure that each of my pieces are done with some really good ribbon I would buy in a specialty shop. These can then be simply hung on any type of tree (i.e., one of those wire ones or even a branch) and you are good to go. They sell well at shows. People always want to come to your booth and go away with something. I know this doesn't helps you find molds but it is a last minute idea. Also, I have noticed on the Pottery Supply House web-site a listing for some old molds in the past. You may want to watch this site for people who are selling old molds and/or supplies. I watch this fairly frequently as you never know what you will find. Good luck, Nancy The "Pottery Supply House" website sounds interesting. I Googled "Pottery Supply House" but found nothing. Can you provide a url? http://www.pshcanada.com/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.