clay lover Posted July 21, 2017 Report Share Posted July 21, 2017 I'm having trouble getting anywhere with this search. Not so very long ago there was a thread on making hump moulds from bisque slabs instead of plaster, with suggestions of how thick , etc. Do any of you remember who started it, or how to find it? Search mode just sent me in circles. TIA Link to comment Share on other sites More sharing options...
tricetra Posted July 21, 2017 Report Share Posted July 21, 2017 Hi, I made one that was only 1cm thick and that has seemed to work. Albeit the mould is not very high at approx 2", if I was to make another higher one I would probably have it a little thicker. Whether this is technically correct I have no idea but it worked for me. Made from Buff clay C08. Hope that helps. Link to comment Share on other sites More sharing options...
Pugaboo Posted July 21, 2017 Report Share Posted July 21, 2017 Try searchig on "bisque MOLD" Here is a recent one: http://community.ceramicartsdaily.org/topic/15892-plates-slump-hump/?hl=+bisque%20+mold T Link to comment Share on other sites More sharing options...
bciskepottery Posted July 21, 2017 Report Share Posted July 21, 2017 http://community.ceramicartsdaily.org/topic/15892-plates-slump-hump/?hl=%2Bbisque+%2Bmolds&do=findComment&comment=123338 When searching, go to the main forum page and search; your search will go across all of the forums. If you search within a forum (not main forum page), your search will be limited to only that forum. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.