Mark C. Posted March 25, 2017 Report Share Posted March 25, 2017 My CXC has been jerking around at low speeds past year or two. I had gotten used to this impediment . I worked on the foot pedal and this did not change the issue. A few months ago I took some photos of my control circuit board and motor. I finally got around to sending them off to Amaco/Brent asking about a fix. The tech suggested checking the brushes. I took them out and cleaned the powder build up off -keeping them in same plane as they came out. After reassembly I threw a run of small pots and the problem seems to have been fixed. The brushes are from 1982 when I bought this wheel-they are still 2/3 intact . Simple fix. Link to comment Share on other sites More sharing options...
Pres Posted March 25, 2017 Report Share Posted March 25, 2017 I have a CXC, no problems yet. I really do not use the wheel as much as you do, so don't expect any problems in this lifetime. Your testimony certainly attests to the way they are built. Most tanks need more maintenance than a CXC! best, Pres Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.