Darran Posted August 30, 2016 Report Share Posted August 30, 2016 I love this forum, it's so inspiring. Following on from the community challenge and lacking in any artistic tallent I decided to take the maker approach and try a technique used in other mediums. I'm not knowledge enough to know what this is called in ceramics or what other ceramic makes use this or similar techniques, but I know a forum who will.😉. Thanks yet again Link to comment Share on other sites More sharing options...
Marcia Selsor Posted August 30, 2016 Report Share Posted August 30, 2016 I don't know what it is called either, but very well done Darren! Marcia Link to comment Share on other sites More sharing options...
tinbucket Posted August 31, 2016 Report Share Posted August 31, 2016 That's similar to benday dots. I agree, very well done Link to comment Share on other sites More sharing options...
sarita Posted August 31, 2016 Report Share Posted August 31, 2016 It looks so interesting.How do you do it? Link to comment Share on other sites More sharing options...
What? Posted September 1, 2016 Report Share Posted September 1, 2016 Stippling. However being in the 3D may be called something else. The idea of controlling the height as well could make for some great art. Could be a great 3D printing project. Link to comment Share on other sites More sharing options...
NancyAmores Posted September 7, 2016 Report Share Posted September 7, 2016 I like this a lot! Sarita, I think that's a wood mold behind the piece so I'm going to guess that OP transferred an image to wood then used a burner tool to make the press mold. Link to comment Share on other sites More sharing options...
Darran Posted September 7, 2016 Author Report Share Posted September 7, 2016 I like this a lot! Sarita, I think that's a wood mold behind the piece so I'm going to guess that OP transferred an image to wood then used a burner tool to make the press mold.Hello Nancy You got it in one. The image is laser cut onot wood which then becomes a press mold. So simple Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.