Kelly in AK Posted July 17 Report Share Posted July 17 Inspired by this thread and the article it links to, I built it. https://community.ceramicartsdaily.org/topic/41994-best-handheld-extruder-for-feet-for-large-pots/ Not counting the trip to the hardware store it took about 15 minutes (I have tools, which is an advantage). It gave me an 11 foot coil that was 3/8” in diameter. I didn’t have to make up some extra soft clay, it’s easy to use and clean, and fast. Brilliant @Pres. The dies are washers pressed into “test caps.” Note well: The plunger has to be sanded down a bit to fit into the 1-1/2” pvc pipe. Min, neilestrick and Pres 3 Quote Link to comment Share on other sites More sharing options...
Pres Posted July 17 Report Share Posted July 17 Craftsman has also come out with an electric putty gun. I'm glad that yours works so well. I use mine mostly for handles which it handles very well. best, Pres Kelly in AK 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.