MaryMen Posted December 14, 2023 Report Share Posted December 14, 2023 Is it possible to purchase a wheel to replace crank roller on Bailey slab roller. We are a senior group and it is hard bending Dow to roll out clay. Thanks for any help. Quote Link to comment Share on other sites More sharing options...
Hulk Posted December 14, 2023 Report Share Posted December 14, 2023 (edited) Hi MaryMen, welcome to the Forum! Which model? Looks like current (manual) models have wheel type cranks except the "22 inch Mini Might II" and "SRT-18" which are fitted with crank arms. If it's not possible to find an off the shelf item, adapting something looks to be straightforward. I'm not finding a detailed image/drawing depicting the handle attachment to the shaft for either model. Can you provide a close-up image of the handle attachment, the shaft diameter, and type? The SRT-18, looks like a round shaft that the handle fits over, fixed by a pin. ...how large a diameter is required - how big a handle? McMaster-Carr has a beautiful polished three spoke aluminum wheel, fourteen-inch diameter, item 6022K21 - it's expensive. They've a twelve-inch spoked dull iron wheel for less than a hundred US dollars, 6025K22 There are round, round and keyed, threaded, square, and "blank" attachment. The blank ones, machine to fit the application. Winco has a 11.8" wheel, just under a hundred bucks. Reid Supply lists several handwheels. Fixtureworks Rencol Added: tried contacting Bailey for an alternate crank? Edited December 14, 2023 by Hulk what does Bailey say? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.