K.Cobb Posted May 28, 2023 Report Share Posted May 28, 2023 Can anyone tell me what their flame looks like (height/color) when firing at the different temp settings throughout a firing with their 18 Olympic Raku or Torchbearer kiln? Also, I have flames that occasionally shoot out of the pilot light’s air adjusting plate. How do I correct this? It is fairly close to closed. Thank you! Quote Link to comment Share on other sites More sharing options...
Mark C. Posted June 3, 2023 Report Share Posted June 3, 2023 To much presure maybe call Olympic and ask them Quote Link to comment Share on other sites More sharing options...
Bill Kielb Posted June 3, 2023 Report Share Posted June 3, 2023 (edited) On 5/28/2023 at 3:52 PM, K.Cobb said: I have flames that occasionally shoot out of the pilot light’s air adjusting plate. How do I correct this? It is fairly close to closed. Thank you! Picture of where this is coming out of would be great, most (not all) pilots have a fixed opening fo primary air. More important, Do you have a two stage regulator on it (sold separately) this kiln appears specified for 11” of water column (0.4 PSI or less than 1/2 PSI). Your propane tank is about 200 psi on a hot day. Edited June 3, 2023 by Bill Kielb Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.