Csikor Posted October 22, 2022 Report Share Posted October 22, 2022 Is it possible to put a mayo clear glaze over a white enrobe slip green ware piece,fired at cone 6 Quote Link to comment Share on other sites More sharing options...
Hulk Posted October 23, 2022 Report Share Posted October 23, 2022 Hi Csikor, Good question! While waiting on Forum members with slip ware experience to weigh in, can you identify the clay, engobe and glaze you are using? Quote Link to comment Share on other sites More sharing options...
Min Posted October 23, 2022 Report Share Posted October 23, 2022 I don't think we can say if this would work or not, too many variables to say for certain. Clay type will make a significant variable, for example if it's a dark burning clay chances are it would need a clean bisque firing to have all the organics burn out without causing pinholes or other issues with a single firing. We also don't know if the clay plus engobe plus glaze are all compatible with each other, in other words do the engobe and glaze both fit each other and the claybody without crazing or shivering? Some glazes work better for single firing than others, as do some clays. I'ld run some test tiles before trying this on "real" pots. Welcome to the forum! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.