ShanRums Posted August 27, 2022 Report Share Posted August 27, 2022 Hello! I have just bought a Keramikos kiln from Ebay, not including a controller, which wasn't a problem as a friend has given me one which they had spare (ipco studio 3000). The kiln has come with a han 15D plug, which we want to wire into the controller, it appears to be as simple as replacing the colour coded cables that are already wired into the controller. However, all the manuals suggest you should consult a professional kiln engineer before attempting rewiring. Also, the current wiring in the controller appears to have an extra earth cable which isn't present on the 15D. Would appreciate any thoughts, link to pictures below. https://imgur.com/a/CzivFhF Thank you in advance! Quote Link to comment Share on other sites More sharing options...
Hulk Posted August 28, 2022 Report Share Posted August 28, 2022 Hi ShanRums! I'm finding manuals for that controller e.g.: Ipco Studio 3000 Controller Manual - · PDF fileIpco Studio 3000 Controller Manual Multi Program Multi-stage Degrees Per Hour Ramp Rate Controller with Soak NOTE: Please read instructions (pdfslide.net) From there, Keramikos model, or better, wiring diagram? Any road, welcome, and bumping the thread. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.