Chiguy Posted July 22, 2022 Report Share Posted July 22, 2022 We have a few gallons of slip that has hardened in the bottom of the Slip-o-Matic tub. The block measures about 8 inches thick, is about 18 x 18 inches, and has hardened up like very thick fudge (not completely dry). We've been trying to cut out or shave off pieces, but are making little progress. Any experience with how to dissolve or cut this up so we can get it out of the machine would be very helpful. We've moving in a week and have to get the equipment out of our basement. Quote Link to comment Share on other sites More sharing options...
oldlady Posted July 22, 2022 Report Share Posted July 22, 2022 would using an electric drill to make holes 6 inches deep help? i am thinking that 1/2 inch holes about 3 inches apart will allow you to dig out the center and gain access to the stuff close to the walls. of course, do not go too deep. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.