suz davis Posted May 31, 2022 Report Share Posted May 31, 2022 hello : ) i have an old gare manual kiln 1818 that needs a new switch. i've been in touch with even-heat, since they now handle gare kilns, but they no longer have them. they have something that will work, it's not ideal though. i am hoping someone has an extra switch...fingers crossed! Quote Link to comment Share on other sites More sharing options...
Bill Kielb Posted May 31, 2022 Report Share Posted May 31, 2022 Looks like an old 2 pole switch, what is the amperage rating. I think common now is 30 amp 2 poles (Industrial) for under $20.00. Lots of uses today from AC to heat pump hot water heater. If that’s rated less than 30 amps (can’t read the rating in the picture) then a new 30 amp 2 pole switch is something I would contemplate rather than a used one. Same mounting - single gang switch. Quote Link to comment Share on other sites More sharing options...
suz davis Posted May 31, 2022 Author Report Share Posted May 31, 2022 thank you so much!!! way cheaper than the one even-heat has! Quote Link to comment Share on other sites More sharing options...
Bill Kielb Posted May 31, 2022 Report Share Posted May 31, 2022 Just Double check the amperage, please Quote Link to comment Share on other sites More sharing options...
neilestrick Posted May 31, 2022 Report Share Posted May 31, 2022 I believe that kiln only pulls 24 amps, and each of the 4 elements is on its own switch, so a 20 amp 240 volt commercial duty switch would work fine. I've put them on that type of kiln with no problems. Bill Kielb 1 Quote Link to comment Share on other sites More sharing options...
suz davis Posted June 1, 2022 Author Report Share Posted June 1, 2022 thanks, and yes, 24 amps. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.