MouseMatt Posted March 6, 2022 Report Share Posted March 6, 2022 Hi! Thanks for taking the time to look at my question! My work looks fine after a bisque firing but after the glaze firing it sometimes warps or becomes misshapen . Any tips to prevent this? Thanks in advance! Link to comment Share on other sites More sharing options...
Bill Kielb Posted March 6, 2022 Report Share Posted March 6, 2022 First to get some opinions, post a picture as it could be your clay body, the shape you are trying to maintain, and or the thickness and construct. I assume you’re ware has warped in some way but without a picture it’s hard to surmise why. Also include your firing range and current clay body to get lots of quality suggestions. Link to comment Share on other sites More sharing options...
Chilly Posted March 6, 2022 Report Share Posted March 6, 2022 I made a spoon rest that flattened in a ^6 firing. Sometimes, it's memory that causes stuff to warp. In my case, the tail was "born" flat, and folded upwards. In the ^6 firing, it remembered it used to be flat, so reverted. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.