Mike G Posted January 3, 2022 Report Share Posted January 3, 2022 I have the manuals for the SNF and TNF models, which cover several kilns in the series, except the SNF 23-3, which I bought unused from a school district surplus. Electrician has hooked it up and all elements and switches are working. I’m looking for recommended settings and schedules for cone 6 bisque and glaze firing but can’t find then anywhere. Any guidance is appreciated. Thanks. Link to comment Share on other sites More sharing options...
Bill Kielb Posted January 3, 2022 Report Share Posted January 3, 2022 See page 11 - 12, I think this might help https://paragonweb.com/wp-content/uploads/IM104_S_SnF_TnF_Inst-Service-Manual.pdf Link to comment Share on other sites More sharing options...
Mike G Posted January 3, 2022 Author Report Share Posted January 3, 2022 Thanks Bill, I have this manual. SNF 23-3 is not included. I notice that the SNF 82 series kilns also have only 2 switches, so maybe I can try their suggested guidelines. Link to comment Share on other sites More sharing options...
neilestrick Posted January 3, 2022 Report Share Posted January 3, 2022 10 minutes ago, Mike G said: I notice that the SNF 82 series kilns also have only 2 switches, so maybe I can try their suggested guidelines. That should work. Link to comment Share on other sites More sharing options...
Bill Kielb Posted January 4, 2022 Report Share Posted January 4, 2022 2 hours ago, Mike G said: Thanks Bill, I have this manual. SNF 23-3 is not included. I notice that the SNF 82 series kilns also have only 2 switches, so maybe I can try their suggested guidelines. Page 12 has multiple models, I assumed you had the 24-3 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.