kcbend Posted July 15, 2021 Report Share Posted July 15, 2021 Does anyone have the name of someone or somewhere that can can repair an old Brent potters wheel in Southern California? thanks Link to comment Share on other sites More sharing options...
Mark C. Posted July 15, 2021 Report Share Posted July 15, 2021 whats the issue? Link to comment Share on other sites More sharing options...
kcbend Posted July 15, 2021 Author Report Share Posted July 15, 2021 Can’t get power to the wheel. I tested the motor. And it works, but I don’t know how to test the control panel Link to comment Share on other sites More sharing options...
kcbend Posted July 15, 2021 Author Report Share Posted July 15, 2021 Link to comment Share on other sites More sharing options...
Mark C. Posted July 16, 2021 Report Share Posted July 16, 2021 so if its not found here https://www.amaco.com/equipment_how_tos call amaco/brent and speak to a tec if the motor works (12v DC) then its either the control board or a slight chance the potentiometer in the foot pedal the tec can walk you thru it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.