Bam2015 Posted January 12, 2021 Report Share Posted January 12, 2021 Hi All, I found a used Skutt 3 phase to purchase, but am currently looking for studio space and concerned that I can only use 1 phase. Does anyone have any idea what this would cost for the conversion if necessary? Thank you, Betty Link to comment Share on other sites More sharing options...
neilestrick Posted January 12, 2021 Report Share Posted January 12, 2021 35 minutes ago, Bam2015 said: Hi All, I found a used Skutt 3 phase to purchase, but am currently looking for studio space and concerned that I can only use 1 phase. Does anyone have any idea what this would cost for the conversion if necessary? Thank you, Betty You'll need a new power cord, power terminal block, and wiring harness, which will cost about $150 total. Will the voltage be staying the same? If the voltage is changing (208 vs 240) then you'll also need a new set of elements, which will cost you about $60 per element. Depending on the kiln, going to single phase can also affect the max temp rating of the kiln. What model is the kiln, and what voltage is it currently set up for? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.