victoriaT Posted September 14, 2020 Report Share Posted September 14, 2020 Hello, I am brand new to the kiln and just purchased a Sitter Kiln LT-3K. I am really stressed about using it and as I continue researching I feel like I am going down a rabbit hole. Do I need a ventilation system? Any help would be appreciated. Link to comment Share on other sites More sharing options...
Fred Sweet Posted September 14, 2020 Report Share Posted September 14, 2020 Victoria- Sitter Kiln LT-3K is not the brand of kiln; it is the kiln sitter itself. Look for a metal plate affixed to the control panel or kiln, itself, for the brand of kiln And model number. Photos would help. Regards, Fred Link to comment Share on other sites More sharing options...
victoriaT Posted September 14, 2020 Author Report Share Posted September 14, 2020 Wow, thank you for responding so quickly, much appreciated. Attached are some pics. Link to comment Share on other sites More sharing options...
neilestrick Posted September 14, 2020 Report Share Posted September 14, 2020 @victoriaT What are the interior dimensions of your kiln? Just going by the amperage it appears to be a fairly small kiln. Where will you be using it- basement, garage...? Link to comment Share on other sites More sharing options...
victoriaT Posted September 15, 2020 Author Report Share Posted September 15, 2020 Hello, The kiln is 36 inches deep by 24 inches wide. I will be using it in the basement. There is a window near by, Thank you Link to comment Share on other sites More sharing options...
liambesaw Posted September 15, 2020 Report Share Posted September 15, 2020 If it's in your basement, vent is recommended Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.