Hands On Posted August 5, 2020 Report Share Posted August 5, 2020 Hello and Help My kick wheel broke 2days ago hope it is clear from the images the cylinder I am holding is made of rubber and I can only imagine was glued to the rod- I could reglue it with and strong flexible glue but feel it would break again there is alot of movement at this point- does anyone know this type of wheel and have any ideas what I should do ? Thank you Link to comment Share on other sites More sharing options...
zebrafinch Posted August 5, 2020 Report Share Posted August 5, 2020 I've had that with my kick wheel. I tied it together with a big bit of bicycle inner tube. Works fine. Link to comment Share on other sites More sharing options...
Hands On Posted August 5, 2020 Author Report Share Posted August 5, 2020 good thinking did ! using the bike tyre like string? Link to comment Share on other sites More sharing options...
Chilly Posted August 5, 2020 Report Share Posted August 5, 2020 its called a rubber isolator, type that into ebay - loads of them Link to comment Share on other sites More sharing options...
Hands On Posted August 5, 2020 Author Report Share Posted August 5, 2020 Thanks just not sure what holds it in place? Link to comment Share on other sites More sharing options...
Chilly Posted August 5, 2020 Report Share Posted August 5, 2020 The flat washer-like bit should unscrew. The replacement will have bolts both ends. Photo's to follow........... Link to comment Share on other sites More sharing options...
Chilly Posted August 5, 2020 Report Share Posted August 5, 2020 Old broken one and new one. Old one has a nut and washer, and they are different sizes, but the same type of item. Link to comment Share on other sites More sharing options...
Chilly Posted August 5, 2020 Report Share Posted August 5, 2020 This is the bit to unscrew Link to comment Share on other sites More sharing options...
Hands On Posted August 6, 2020 Author Report Share Posted August 6, 2020 Brillant-I see I have been trying to undo that part will try with more intent Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.