joyfulsherpa Posted October 12, 2019 Report Share Posted October 12, 2019 I’m wondering about the compatibility of brush on glazes when applied over a pot that has been dipped, as a second layer of color? Can it be done? thanks for any advice! Link to comment Share on other sites More sharing options...
liambesaw Posted October 12, 2019 Report Share Posted October 12, 2019 Sure, just test it out. Might peel off easily or be totally fine Link to comment Share on other sites More sharing options...
neilestrick Posted October 13, 2019 Report Share Posted October 13, 2019 In general, brushing on top of a dipping glaze can be difficult. Because the dipping glaze doesn't have the hardeners and binders in it, you may find that the brush picks up the dipped glaze rather than just going over the top of it. It will depend on the makeup of the glaze. Those with higher clay content will probably work better. I would also do the brushing glaze before the dipped glaze is totally dry. If glazes can have a leather hard stage, that would be the time to do it. Like when it's dry enough to touch but not totally bone dry. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.