nsfdesign Posted June 5, 2018 Report Share Posted June 5, 2018 Anybody know anything about Jenkins kilns? I tried searching on the Internet, but nothing useful came up. I may be able to get one free from a friend. Don't know much about its use--although it looks well used--but the friend put on a new power cord. It has a kiln sitter model LT-3K, but no model number for the kiln itself. He would like to use it in his knife-making business, but is not sure that would work for him. I'm going to use it mainly for bisquing, if he decides to give it up. Link to comment Share on other sites More sharing options...
Magnolia Mud Research Posted June 5, 2018 Report Share Posted June 5, 2018 have you searched for Jen-Ken kilns? http://jenkenkilns.com/ Link to comment Share on other sites More sharing options...
nsfdesign Posted June 5, 2018 Author Report Share Posted June 5, 2018 Are they the same? The logo on the kiln definitely says Jenkins. Link to comment Share on other sites More sharing options...
neilestrick Posted June 5, 2018 Report Share Posted June 5, 2018 Is there any information about the kiln- voltage, phase, amps, etc? Link to comment Share on other sites More sharing options...
nsfdesign Posted June 6, 2018 Author Report Share Posted June 6, 2018 Kiln sitter plate has 240 V.A.C., 50 amps, 60 HZ, but there is no other identification on the kiln that I could see from the photos he sent me. I've attached a photo of the logo. Link to comment Share on other sites More sharing options...
oldlady Posted June 6, 2018 Report Share Posted June 6, 2018 maybe the name has changed. jenken being current, jenkins is old. Link to comment Share on other sites More sharing options...
neilestrick Posted June 6, 2018 Report Share Posted June 6, 2018 Jen-Ken is in Lakeland, Florida, so they may well be the same company. Without any other info, you won't know what size breaker the kiln needs to be on, unless you want to do all the calculations based on the resistance of the elements and how it's wired. How big is the kiln? How many prongs on the plug? Link to comment Share on other sites More sharing options...
Mark Bradford Posted August 28, 2019 Report Share Posted August 28, 2019 My wife has this same kiln, and I converted it to a fusing kiln by replacing the kiln sitter with a programmable amp/soak controller. While trying to do this, I hit the same roadblock you did. On a whim, I called Jenken. The lady who answered the phone was very helpful and pleasant. She knew right away the model number of my wife's kiln, just from a physical description. She then emailed me the circuit diagrams I needed, free of charge. If you are still looking for your info, don't hesitate to call Jenken. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.