Andrew Stephenson Posted February 22, 2018 Report Share Posted February 22, 2018 Hi, does anyone know the process for changing the oil in a walker pug mill. I think I have an idea but I'm not sure of the right fill plug. Thanks for any advice. It is the model without the reverse switch (early model). I did find a spec sheet from the manufacturer of the motor but no instructions on changing the gear oil. Link to comment Share on other sites More sharing options...
Pres Posted February 22, 2018 Report Share Posted February 22, 2018 Make certain that you are using gear oil-major problem if you don't. As far as the in out plug, they are not very large. I used a squirt bottle to fill. best of luck, as this machine will last forever if taken good care of. I had one at the HS I taught at for many years. If you want to see more discussions on the Walker, and pug mills do a search in the home page search window. best, Pres Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.