Benzine Posted September 26, 2017 Report Share Posted September 26, 2017 After getting the classroom studio set up for the year, I noticed, that one of my Amaco wheels did not run, at both speeds. I took the control switch apart, and checked the connections and such. But only one way would work. I ordered a new switch, which didn't solve the problem. So it doesn't seem to be a switch issue, but a motor issue. Any idea what the problem could be? It worked at the end of last school year, and it was stored away safely for the Summer. We can still use it, but obviously having both speeds would be ideal. Link to comment Share on other sites More sharing options...
graybeard Posted September 28, 2017 Report Share Posted September 28, 2017 Have you tried to contact AMACO? I doubt they would have a fix, but they might be able to point you in the right direction. They had the tire for the cone drive on my old model B Amaco wheel and their people are very helpful. Good luck and let us know how things work out. Graybeard Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.