jemenfous5 Posted February 24, 2013 Report Share Posted February 24, 2013 I believe I need to replace the motor in my EnviroVent 2 system. I read on here that it can be replaced with a generic motor. Does anyone have a link to an appropriate motor? Link to comment Share on other sites More sharing options...
neilestrick Posted February 25, 2013 Report Share Posted February 25, 2013 The motor on the vent should have a serial plate with a model number. Otherwise, look for a motor with the same CFM rating and mounting plate size. It's a 140 CFM shaded pole blower. Dayton and other companies make them. I should be able to get you a part number when I'm back at my shop later. I think I paid about $75 for the last one I bought. Link to comment Share on other sites More sharing options...
neilestrick Posted February 25, 2013 Report Share Posted February 25, 2013 HERE is the motor we use on the L&L Vents. Should be the the same or at least very similar. Check the size of the mounting flange to be sure. Link to comment Share on other sites More sharing options...
firerobinpotter Posted September 17, 2013 Report Share Posted September 17, 2013 Jemenfous5, I, too, need to replace my EnviroVent 2 motor. Do you recall what you ended up purchasing? Was it a simple change over and does it work well? Thanks!Michael Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.