Nightshade Posted November 17, 2012 Report Share Posted November 17, 2012 Ok, so I found two kilns that fire the same. They are the smaller ones that come in sections. This might be a dumb question but could I stack them to have a taller kiln? Just a thought. Any feedback is appreciated. Link to comment Share on other sites More sharing options...
Mark C. Posted November 17, 2012 Report Share Posted November 17, 2012 Ok, so I found two kilns that fire the same. They are the smaller ones that come in sections. This might be a dumb question but could I stack them to have a taller kiln? Just a thought. Any feedback is appreciated. Are these electrics? gas? same brand ?how many amps?-same plugs? dead rings?Need more info? Mark Link to comment Share on other sites More sharing options...
Cass Posted November 17, 2012 Report Share Posted November 17, 2012 sounds doable if they are the same model/specs...i would find an adventurous independent kiln tech or electrician ( if we are talking about electric) Link to comment Share on other sites More sharing options...
Lucille Oka Posted November 17, 2012 Report Share Posted November 17, 2012 I do not know the ins and outs of such a configuration but Skutt does. You can ask them about the Transformer package and see if it is available to you and if it will work for you. Don't forget to watch the video- http://www.skutt.com/transformer/ Link to comment Share on other sites More sharing options...
OffCenter Posted November 17, 2012 Report Share Posted November 17, 2012 During my first incarnation as a potter in Denver during the '70 I sometimes helped a sculptor fire her pieces by adding one or two sections of one kiln to another kiln. They were the same model (probably either Skutt or Paragon). Jim Link to comment Share on other sites More sharing options...
perkolator Posted November 19, 2012 Report Share Posted November 19, 2012 yes it CAN be done if you have a means to safely power those additional sections - i'm sure you may already know, you can't just simply plug them into the same control box (unless it was designed for this). Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.