johnb Posted January 5, 2013 Report Share Posted January 5, 2013 Susan, I agree try goodwill or salvation army for a table. I have used plastic table cloths for 20 plus years they usually last for a couple of months and are cheep enough to replace. Depending on the table you can get clips that attach the top to the table just by slipping them on for "Coleman camping supplies found in wall mart, sporting goods suppliers. gander mt. , cabalas, ect.... If that does not fit the bill some scrap pieces of 1/4, 1/2, 3/4 inch plywood in probably 1 in. widths, tuck the table cloth in between and screw to the bottom watch the length of the screw so that it does not come through the top face, eg. 3/4 in. top with a 1/4 in scrap = 1 in. use a 3/4 in. screw. Good luck jbcpottery Link to comment Share on other sites More sharing options...
yedrow Posted January 5, 2013 Report Share Posted January 5, 2013 I've been using hardiboard for the top of my table for the last few months. It isn't plaster, but it works pretty good. Joel. Link to comment Share on other sites More sharing options...
Ceallach Posted March 10, 2018 Report Share Posted March 10, 2018 On 10/17/2012 at 8:33 AM, skopchains said: Wow, I didn't realize canvas isn't a good idea for a work surface b/c of dust! Thanks! Susanna The large studio that I work in has canvas covered tables, that get a solid washdown every night. Everyone is taught to use wet sponges to clean. The routine is to use a sponge for the spots with lots of stuff, then all tables get half a 5 gallon bucket thrown on them, which then gets squeegeed off on to the floor. The floor then gets mopped each night. If you leave the studio at night and then walk back in, your glasses will fog up because of the moisture. Each class is expected to wipe things down, so every 3 hours or so, the studio gets a wipe down.....but that's with about 100 students going through on any given day. My wedging table has a nice plywood cover over plaster that works pretty well, although I may have to recover it for the first time. The cover then lifts off for a plaster table. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.