claclana Posted August 24, 2012 Report Share Posted August 24, 2012 Hi i bought a bunch of 2nd hand shelves for the kiln and one is made of metal, I like it because is so thin but I don'r know what max temp. will it withstand. Do some of you know about this? Thanks!! Link to comment Share on other sites More sharing options...
neilestrick Posted August 24, 2012 Report Share Posted August 24, 2012 Are you sure it's metal? Any chance it's black? Could be silicon carbide. If it's about 5/16" thick, it's an Advancer, best shelf available. Link to comment Share on other sites More sharing options...
Mark C. Posted August 24, 2012 Report Share Posted August 24, 2012 I know of no such thing. I would say heat it no more than your oven with cookies-say 500 degrees. I think you have a piece of metal in with the shelves. Thats my guess. Any chance of a photo? Mark Link to comment Share on other sites More sharing options...
Guest JBaymore Posted August 25, 2012 Report Share Posted August 25, 2012 I can see how someone not used to them could mistake Advancers for some sort of metal. best, ..............john Link to comment Share on other sites More sharing options...
Mark C. Posted August 25, 2012 Report Share Posted August 25, 2012 Is it Grey and about 5/16th thick? smooth on the surface and will it hold a magnet?What are its dimensions ? If its metal it most likely will hold a magnet? Advancer will not. Mark Link to comment Share on other sites More sharing options...
claclana Posted August 27, 2012 Author Report Share Posted August 27, 2012 I will shoot a photo of this "shelve"next to the others to compare and post it! thanks for your answers Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.