Tmurph Posted January 17, 2019 Report Share Posted January 17, 2019 My wheel stopped working, so I opened up the control box and when I did a few wires popped off. It is an older model c I was hoping someone could take a picture of the wires inside their control box so I can put it back together. Thanks in advance!!! Link to comment Share on other sites More sharing options...
neilestrick Posted January 17, 2019 Report Share Posted January 17, 2019 It'll depend on which controller it is. They've had a half dozen or more over the years. Put up a picture of the control box. Link to comment Share on other sites More sharing options...
Mark C. Posted January 17, 2019 Report Share Posted January 17, 2019 I own 5 Brent wheels (and one is an older model C) and the boxes have changed many times over the years and they use the same box on many models-As Neil said take a photo of the front and inside the back and then I can maybe help you. you can post it here or provide a link to another photo site Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.