Alex. Posted February 12, 2012 Report Share Posted February 12, 2012 Good day i wish to make a capsule of the raised durability (~1 cm D) with an aperture and after to seal up it. At sealing temperature use is forbidden. What kind of ceramics will approach for this purpose is better ? (in a capsule there will be a small internal pressure) Link to comment Share on other sites More sharing options...
Chris Campbell Posted February 12, 2012 Report Share Posted February 12, 2012 It is difficult to answer your questions without more information about the process you want to use to make the object and seal it. Link to comment Share on other sites More sharing options...
Marcia Selsor Posted February 13, 2012 Report Share Posted February 13, 2012 Your description of your intentions is so vague as to be unanswerable. Could you be more specific? Marcia Link to comment Share on other sites More sharing options...
Alex. Posted February 14, 2012 Author Report Share Posted February 14, 2012 Thank you for your answers I do not have specific requirements for material other than the named material must be strong and to seal the hole should approach it. I'm looking for the best option for this one. Link to comment Share on other sites More sharing options...
Pres Posted February 14, 2012 Report Share Posted February 14, 2012 Good day i wish to make a capsule of the raised durability (~1 cm D) with an aperture and after to seal up it. At sealing temperature use is forbidden. What kind of ceramics will approach for this purpose is better ? (in a capsule there will be a small internal pressure) As the others say here, you are really too vague for any recommendations. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.