Jeff Thompson Posted September 14, 2023 Report Share Posted September 14, 2023 Hi everyone, I have a favor to ask! If anyone has a Kiln Sitter gauge and a flatbed scanner handy, would you mind scanning it for me? (Or printing the attached PDF at 100% and verifying that it looks right?) $12 for a piece of stamped sheet metal seems way too high for me to stomach, so I'd like to create 2D and 3D files if folks want to lasercut or 3D print their own... or even just laserprint and cut out by hand! I'm also planning to publish the files online for others to use and will share them here too. I found some pretty good images online and was able to trace the outline, but I'd much rather work from an actual object. It does need to be scanned though and not photographed, to keep the image from being distorted and to get an accurate outside diameter. I'd be happy to send whoever scans their gauge for me a new lasercut one as a thank-you, if you want an extra! KilnSitterGauge.pdf Quote Link to comment Share on other sites More sharing options...
neilestrick Posted September 14, 2023 Report Share Posted September 14, 2023 I probably have an extra I can send you. Message me your address. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.