George Lathem Posted March 8, 2022 Report Share Posted March 8, 2022 Just got in some new b-mix wc401 and the color has changed. Has anyone send the new color and does it change the colors of glazes. Worried my colors will change . Thanks Link to comment Share on other sites More sharing options...
kswan Posted March 8, 2022 Report Share Posted March 8, 2022 I'm not sure if my clay comes from the same factory as yours, but I did notice a change in my clay color as well, although it was very subtle. I could only tell by placing one piece from older clay side by side with the new. Once it was glaze fired, I didn't see any change in the clay body color. My work has underglaze colors topped with clear, so I can't speak to the glaze color itself changing, except that they look the same to me. I do feel that the new clay is shorter than it had been previously. I read here that the talc source has changed, so that may be what's causing the difference. Link to comment Share on other sites More sharing options...
Min Posted March 8, 2022 Report Share Posted March 8, 2022 2 hours ago, kswan said: I read here that the talc source has changed, so that may be what's causing the difference. Has anyone see the colour of the new CimTalc? Wondering if it's white or gray? I've had a change in the clay I use prior to the talc change, ball clay was put down as the reason for the change. Same experience as kswan, looked and acted the same once fired. Welcome to the forum. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.