curt Posted September 12, 2016 Report Share Posted September 12, 2016 Looking for quick and dirty assessment of this kiln in new condition. Questions I have: Have heard that top loaders such as this one can be under-insulated, and fire unevenly. Is this true? And if so, do you recommend the 3 zone control option for this kiln? I guess it means more thermocouples/controls, which is more money for sure, but... Any other issues one should know about? Here are specs: Voltage: 240 Amps: 20 Power Type: Single Phase Maximum Temp: 1287 degrees celcius Internal Width: 35.5cm Internal Depth: 45.7cm Volume: 51L Powercord: not included. Warranty: 2 year replacement parts only Link to comment Share on other sites More sharing options...
Dick White Posted September 12, 2016 Report Share Posted September 12, 2016 This is a small kiln, so uneven firing should be a non-issue - there isn't enough space to be uneven. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.