ronfire Posted September 22, 2015 Report Share Posted September 22, 2015 I made up a sanding bat that works great. The bat is ½" MDF board with 60 grit sand paper. The sand paper can be rinsed off and will work for a long time. I had some paper left from when I used to sand hardwood floors. You can usually buy a few sheets from a rental shop that rent the sanders. This is Very heavy duty stuff and comes in 8" or 10" width. Glue it on with some spray contact cement. The paper comes in sheets around 2 ft long or for the newer machines in belts that are cloth backed, either will work. I find the best tool to cut the paper is a tin snip, a knife will work but it will dull it immediately. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.