Magnolia Mud Research
-
Posts
1,093 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Status Replies posted by Magnolia Mud Research
-
Morning all. This is probably a basic question to many of you , but my Chemistry knowledge is not great and I would appreciate some help. Is it possible to change an earthenware clear gloss glaze (firing to 1100 centigrade) to a higher firing stoneware glaze (firing to 1200 centigrade) without knowing the formula of the original glaze. I am sure this question is answered in Digital Fire or somewhere on this forum, but I am feeling a bit lazy to search through- got too much playing in the studio to do!
-
I have used thin coatings of commercial earthenware clear glazes on bisque ware fired to cone 10(reduction) without problems. The earthenware glazes matures (fully melted) at about the same temperature as bisque firing; this means that the ware surface is quite porous when the glaze melt forms and the melted glaze soaks into the surface pores. The effect is generally a thin transparent covering with some gloss. The surface is visually smooth while the clay surface fine markings are still tactilely available. Keep the application thin until you have data on maximum allowable thickness for your work and firing situation.
-
-
Finished COE graphs, alumina to CEC comparison charts. Okay, so I lead a boring life! It is what we Nerds do.
-
COE is a useful material property after firing; the material is significantly changed (aka chemical reactions have taken place) from the water/solids mixture where CEC is measured. An empirical correlation based on a large and wide ranging data set would be interesting and perhaps useful.
What leads you to expect there is a causal relationship between Coefficient Of Expansion and Cation Exchange Capacity?
-