Formseth Posted April 14, 2015 Report Share Posted April 14, 2015 How do you get the belt off a Soldner S100? Seems like it should be simple, but that's not the case for me. I would appreciate any directions anyone can offer. Link to comment Share on other sites More sharing options...
neilestrick Posted April 14, 2015 Report Share Posted April 14, 2015 Most belts can be removed by simply pulling them down/off at one edge of the large pulley, then slowly rotating the pulley until the belt comes off. Link to comment Share on other sites More sharing options...
Marcia Selsor Posted April 15, 2015 Report Share Posted April 15, 2015 I recently replaced the belts on my Bailey. I have also replaced them on my Soldner mixer. There should be a mechanism to adjust the tension of the belt. Find that and you can reduce the tension to get the belt on and then tighten the tension. Marcia Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.