Claypple Posted February 28, 2013 Report Share Posted February 28, 2013 I noticed how tough it is to clean the earthenware if the slip drops on the cement floor. It leaves stains. So, I decided to use the earthenware slip as a stain on my cemented retaining wall. Just to even the colors and make the wall more attractive. Does anyone have any suggestion how to make it a little more weather proof? I am afraid that the rain will clean it off the wall easily. Link to comment Share on other sites More sharing options...
Denice Posted February 28, 2013 Report Share Posted February 28, 2013 I think you would apply a exterior concrete sealer over it as long as it just stain not an actual layer of clay. I do some acid etch staining on concrete and they sell a sealer for it to keep the colors from fading. Your suppose to put new sealer on it yearly, I thinks it's easier to spray it with acid etch again so I have never used it. Denice Link to comment Share on other sites More sharing options...
Claypple Posted March 1, 2013 Author Report Share Posted March 1, 2013 Thank you Denice! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.