Jump to content


Photo
- - - - -

Porcelain


  • Please log in to reply
4 replies to this topic

#1 anniec9

anniec9

    Member

  • Members
  • PipPip
  • 19 posts
  • LocationAustralia

Posted 06 February 2013 - 01:12 AM

Can someone advise when is the best stage of drying to carve porcelain? I have just started throwing and handbuilding with porcelain and not sure whether it is leather hard or dry.

Thanks Annie

#2 Lucille Oka

Lucille Oka

    Advanced Member

  • Members
  • PipPipPip
  • 756 posts
  • LocationCalifornia

Posted 06 February 2013 - 06:48 AM

The most important thing is to limit the amount of dust that you will create.
You have to determine the best texture for your carving.
Try carving at different 'water content textures' and see what feels best to you. Get a spray bottle just incase you may need to add a little water.
John 3:16
"For God so loved the world that He gave His only begotten Son, that whosoever believeth in Him should not perish but have everlasting life".

#3 Marcia Selsor

Marcia Selsor

    Professor Emerita, Montana State University-Billings

  • Members
  • PipPipPip
  • 4,081 posts
  • Locationwhere Texas, Matamoros, Rio Grande and Gulf of Mexico come together.

Posted 06 February 2013 - 07:17 AM

I start carving after trimming. Leather hard. I sometimes squirt the surface for a gentle moistening.
Smoothing the edges with a damp chamois is an easy clean up rather than sanding when dry.

Marcia

#4 Chris Campbell

Chris Campbell

    clay stained since 1988

  • Members
  • PipPipPip
  • 2,299 posts
  • LocationRaleigh, NC

Posted 06 February 2013 - 12:01 PM

The answer lies with what you want your carving to look like as each stage will give you a different look. As your porcelain dries your lines will go from soft and flowing to sharp and precise. Also, every type of porcelain will react a bit differently at each stage with some being more forgiving than others.

Chris Campbell
Contemporary Fine Colored Porcelain
http://www.ccpottery.com/

https://www.facebook...88317932?ref=hl

TRY ...   FAIL ...  LEARN ...  REPEAT


#5 anniec9

anniec9

    Member

  • Members
  • PipPip
  • 19 posts
  • LocationAustralia

Posted 07 February 2013 - 09:54 PM

Thank you everyone for your help. I can see I will need to try at different stages to find the result I want.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users