ruth farwell Posted May 26, 2010 Report Share Posted May 26, 2010 I've just bought an Olympic 1827 Torchbearer Kiln, natural gas. I have a pyrometer, no oxygen probe. I'm firing for the first time this weekend. I would like input on how to control temperature rise, atmosphere (when should it be redux, neutral, oxidation?) and how to control as much as possible with out instruments, how many and where to place the cone boats, and any advice on how to stack the shelves. I've read a few blogs and it looks like some people have success, and a lot do not. I've only fired a small electric kiln before, controlled by a kiln sitter. Link to comment Share on other sites More sharing options...
AndyL Posted May 26, 2010 Report Share Posted May 26, 2010 Ruth I've never fired a gas kiln before so I can't offer any help from a practical standpoint, I'm certain some members of the community that do will chime in. Until then I can suggest you contact the kiln's manufacturer and see if their support department can offer some help. They do want you to succeed after all. Link to comment Share on other sites More sharing options...
Colonel Potter Posted August 2, 2010 Report Share Posted August 2, 2010 Ruth, I saw a posting long ago about someone sharing their experiences with that kiln. Look in the archives. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.