oldlady Posted November 22, 2017 Author Report Share Posted November 22, 2017 thank you all for your concern. my kiln is just below 300 degrees with the last batch of work for this weekend's holiday sale. should have had two firings but with my clay taking so long to be workable and then to dry, just used up all the available studio time. hoping everything will come out OK. high hopes for several of them. GREAT NEWS! everything came out of the kiln just the way i had hoped! only one piece has become a milk for the cat saucer. and on that i used too much black glaze which covered up the drawing. no cracks, no other problems. would show photos of the peaches platter and another one with the bark surround that ronsa likes but i am out of AA batteries for my camera!!! thank you jennifer at highwater, your explanation and remedy is excellent. i will hold onto the boxes i have and use them next spring when i get back to this studio. you are right, throwing was easier because the clay was so malleable but i only had 2 pieces that were thrown. Link to comment Share on other sites More sharing options...
Evezamora Posted December 11, 2017 Report Share Posted December 11, 2017 My recent order of LL was super wet too. It's even difficult to dry out slabs because it sticks to drywall even after it's sat for several hours and appears to be quite dry on the surface layer. Link to comment Share on other sites More sharing options...
glazenerd Posted December 11, 2017 Report Share Posted December 11, 2017 Describe the tackiness when you just handle it. Curious? nerd Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.