Sjtpottery Posted December 28, 2015 Report Share Posted December 28, 2015 I purchased a Randall potters wheel 40 years ago. I have everything but the wheel head. please make suggestions for replacement. what type of bats are being used these days. thank you, Steven Link to comment Share on other sites More sharing options...
Pres Posted December 28, 2015 Report Share Posted December 28, 2015 A quick search yielded this http://gallagherpottery.com/archives/1460' You may find other ways to alter your wheel with some google effort. I learned on a Randall, and loved them. The splash pan was one of the best out there, and the motorized control was also quite good. Good luck, and Welcome to the forums> best, Pres Link to comment Share on other sites More sharing options...
rayaldridge Posted December 28, 2015 Report Share Posted December 28, 2015 Axner sells a Lockerbie wheel head. http://www.axner.com/wheelheadforlockerbiekickwheels.aspx You just need to measure your shaft diameter, and call them to make sure it's the same. The Lockerbie uses a 1 inch shaft, if I'm not mistaken. Link to comment Share on other sites More sharing options...
vicflash Posted March 20, 2016 Report Share Posted March 20, 2016 You're right about cheap. This was $50 and works like a champ. I thought I was pretty lucky and look forward to using it. Link to comment Share on other sites More sharing options...
Nancy Jurs Posted June 24, 2020 Report Share Posted June 24, 2020 On 3/20/2016 at 2:44 PM, vicflash said: You're right about cheap. This was $50 and works like a champ. I thought I was pretty lucky and look forward to using it. Anyone know where I can find a Randall wheel bucket head???? And a seat???? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.