Jump to content

Icyone2

Members
  • Content count

    18
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Icyone2

  • Rank
    Newbie
  1. Home Made Stilts

    I had to use special stilt pins when making my stilts. Softer metal (nails etc) will just melt and bend (even some of the thinner stilt pins do under weight too) . I found mine on ebay way back when I did it. I even got some 6" ones I use for small t-pot lids and such. I just drilled a hole in a shelf post and set them in. If you google stilts there are a lot of results
  2. thanks bciskepottery that was something I very much wanted to look into. However now looking at it looks a bit more difficult to put my head around than I think I can work out. Thanks for the link, I'm going to keep looking at her site see if I can figure it out more
  3. Thanks Chris, I'll give them a try
  4. Because the glaze we have been using for 20 years has been discontinued (pink one forgot the name) we have been trying the new glazes from Gare and Duncan and we hate them does anyone have any recommendations for a clear earthenware food safe bisque glaze. Our bisque is fired to 03 to 04 and we fire our glaze loads at 06. I don't mind if I get it in dry form, liquid anything. I'm open to try anything. We go through a good amount probably 10 to 20 gallons a month I'm open to try anything and any help is most appreciated **whoopsie I thought I was posting this in the clay and glaze area
  5. Slab Roller Experiment

    Hi Chris, sorry to cause such a fuss and side track your original post. Once one starts using rss feeds (from reading point of view) they are invaluable for keeping up with "lots" of sites easily and daily. Sort of like reading a daily newspaper that only has things one wants to read (terrible analogy) and like Carl says it makes it easy to keep up with 100's of site and see who has new posts just in the time it takes for morning coffee. Although it takes a bit more to go back and read the new posts An easy way to see if a site has a feed is to look for the little orange feed icon on the right side in the browsers address bar when visiting a site.
  6. Slab Roller Experiment

    love your site Chris, wish you had a rss feed to add to my reader though. Is in not a "blog" so much? Is that the reason no feed?
  7. Monster Pug Mill

    looks like homemade perhaps is it just regular metal and rusted inside too? , the vacuum areas need to be sealed with caulk or silicone if you plan on taking it apart to get it (vacuum area) going. At least mine does.
  8. Food Dye In Commercial Glaze

    I've heard of people using food coloring in wax relief and it fires out
  9. Pricing Old Wheel

    Will you be shipping or just have local pickup? What area/state?
  10. Abstract Purple

    What recipe?
  11. Kpg

    Can you give us an example on how it is used or what you are working with? Is it a glaze formula?
  12. Reclaiming Clay

    So far so good, been casting with my mix just fine. No problems with test piece that was fired then glazed and fired again
  13. I am still learning to use this site, I hope you get this. Thanks for the advice and I hope everything comes out of the kiln alright.

  14. Slip Rock

    I take mine and put it bucket and break up pieces with a clean hammer or piece of wood then put on a mask and use my drywall mud mixer to break it up more. Add hot water and add a little bit at a time to good slip after it is reconstituted.
  15. Another side effect of not venting I've noticed is also rust. Not sure what causes it but metal items in our warehouse tend to get pretty rusty pretty fast
×