Lloyd Posted June 6, 2022 Report Share Posted June 6, 2022 I'm new to upgrading control panels so any help would be greatly appreciated I'm looking for a schematic or diagram that would show me how to step by step switch the wires from the old control panel the DTC 600c to the new Bartlett control panel RTCÂ Any and all help will be appreciated please remember that when you send me the instructions from one board to the other that I am a novice thank you for all your help in advance have a great day Lloyd Link to comment Share on other sites More sharing options...
neilestrick Posted June 6, 2022 Report Share Posted June 6, 2022 I believe that is a direct swap, assuming they both have the same type of connectors. Last time I bought one (which has been a few years) the Bartlett RTC-1000 is available with either individual slip-on and screw terminals like the V6-CF, or with the two wire bundle connectors like Paragon uses on their controllers. Just move everything over from the old controller to the same position on the new controller. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.