laurieE Posted February 24, 2012 Report Share Posted February 24, 2012 I am considering switching my clay body for a mosaic that will have large press-molded thick relief areas (the largest area is 17" across). Has anyone worked in the Laguna/Miller clay body-North Eastern #30 which is a cone 5/6. I am wondering about it's stability and how it is to sculpt with and press-mold. Link to comment Share on other sites More sharing options...
Lucille Oka Posted February 24, 2012 Report Share Posted February 24, 2012 I have never tried this clay body but, on the Laguna website is a chart that will tell you what the best uses of the specific Laguna bodies are. That is the best place to start. And see if you can get a sample to test for construction and glazing techniques before you get a large shipment. Check which glazes are compatible. And be sure to note the cone numbers for bisque, clay and glaze maturation. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.