nawaz Posted May 11, 2017 Report Share Posted May 11, 2017 Hi m working in a brick factory we need to monitor temperature of kiln m using thermocouple but it stop working at 900 celcius What should I do about it Link to comment Share on other sites More sharing options...
nawaz Posted May 11, 2017 Author Report Share Posted May 11, 2017 M working in a brick factory how should I do temperature management Link to comment Share on other sites More sharing options...
Guest JBaymore Posted May 11, 2017 Report Share Posted May 11, 2017 Can you give us more information? What is the pyrometer unit itself you are using? Do you know the type of thermocouple that you are using? Is the thermocouple connected directly to the meter or are you suing extension wiring of some sort? If there is extension wiring, what kind is it? What is the desired top temperature you wish to monitor? And so on. Where are you in the world? best, ..................john Link to comment Share on other sites More sharing options...
douglas Posted May 12, 2017 Report Share Posted May 12, 2017 You need a different thermocouple, you need a type "S" which goes to higher temperatures. Check your pyrometer documentation to find out what connections it supports. Y http://www.bigceramicstore.com/info/ceramics/tips/tip89_thermocouples.html Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.