Jump to content

Jaimie

Members
 View Profile  See their activity

  • Posts

    6

  • Joined

  • Last visited

 Content Type 

Posts posted by Jaimie

  1. Anyone Have A Really Old Creative Industries Model Mp Wheel?

    in Studio Operations and Making Work

    Posted

    5 hours ago, JohnnyK said:

    Thanx for the pix, Jamie...What did you do to "adjust" the pot? The first thing I would do is pull the throttle bar and see if you could turn the shaft on the pot CCW manually to its stop to see if that stops the wheel from turning...if it does, then re-install the throttle bar and away you go. If it doesn't, then you'll have to replace the pot. Check at  www.speedball art.com to see if you can get a replacement through them. If not, with the power off and one wire disconnected from the pot, measure the high end Ohms of the pot (the low end should be zero Ohms), record the overall physical measurements of the pot and go searching for a replacement.

    Yes, we tried all of that.  The new pots with speedball have a longer shaft.  I will try an electrical repair place. Thank you so much for your help.

  4. Anyone Have A Really Old Creative Industries Model Mp Wheel?

    in Studio Operations and Making Work

    Posted

    On 1/27/2021 at 8:29 PM, Hulk said:

    Hi Jamie,

    Try a .pdf reader? If you are running windows, Sumatra is free, simple, easy

    Free PDF Reader - Sumatra PDF (sumatrapdfreader.org)

    I can read the file ok.

    Likely you will be looking at disassembling the pedal and troubleshooting from there; good luck!

    So I took the pedal apart.  adjusted the rheostat and it still wont stop.  wondering if it just needs a new rheostat??

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept