Shelly M

Members

Status Replies posted by Shelly M

Shelly M

Shelly M I have two earthenware pieces already glazed and fired to ^05 that turned out poorly. I want to reglaze and refire them (^05) but don't have any other low fire pieces to put in the kiln. Can I put these two pieces in with my BISQUE fire load of cone 5-6 pieces and fire them to ^05 along with my bisque? Or will the speed (slow) of the bisque fire and the organic matter that burns out of the clay affect the low fire glaze?
- August 14, 2016
- Report
1. Shelly M
  
  Thank you both!
  
  August 20, 2016
  
  Report
2. (See 2 other replies to this status update)
Shelly M

I am looking for a white slip recipe to use on a red earthenware clay body. Any suggestions?
- May 14, 2016
- Report
1. Shelly M
  
  thank you. still getting the hang of how to use the forums.
  
  May 16, 2016
  
  Report
2. (See 1 other reply to this status update)
Shelly M

I had a small test tile melt glaze onto the shelf. I was able to chisel most of it off but there is still a small amount of glaze adhered to the shelf. Can I kiln wash over that 1-inch spot or does every bit of glaze have to be removed?
- May 6, 2016
- Report
1. Shelly M
  
  thank you all for your replies. guess i'll be grinding away!
  
  May 14, 2016
  
  Report
2. (See 3 other replies to this status update)