JohnP Posted October 5, 2014 Report Share Posted October 5, 2014 I am firing some work that is glazed cone 6 on the inside with just colored slips and an oxide wash on the outside i need to fire to cone six and was hoping to put the decal on the colored slips during this firing if i do a thin glaze wash or 3124 wash could i put the decal on top so it has some flux to adhere it or could i put the decal on and thin wash over it. The image is not detailed but i dont want it to rub off or fire out. Thank you Jp Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.