Laura DeBoer Posted April 6, 2010 Report Share Posted April 6, 2010 I would like to start using a mid-range stoneware rather than a low-fire earthenware. However, the max temp on my kiln is 2000 F. I tried firing it higher to see how high it would go, and it only got to 2011. I would like to know if it's possible to change anything (the elements, etc.) to make the kiln able to fire to a higher temperature. We don't have the budget to buy a new kiln, but could afford some changes. We are using an Amaco Excel Select Fire. Thanks for any suggestions! Link to comment Share on other sites More sharing options...
Lemmingtherapist Posted April 6, 2010 Report Share Posted April 6, 2010 I would suggest emailing Amaco from their website. I am based in the UK and in the past emailed them a question about one of their glazes and found them very helpful and quick to respond. Link to comment Share on other sites More sharing options...
AndyL Posted April 7, 2010 Report Share Posted April 7, 2010 Contact Amaco for the specs on your kiln and advice to convert your kiln. Be concerned about the maximum temperature it's firebricks are rated for. Sight unseen most likely the brick won't take the higher temperatures you want to reach. Link to comment Share on other sites More sharing options...
Laura DeBoer Posted April 19, 2010 Author Report Share Posted April 19, 2010 Thanks for the input! As luck would have it, I found a nearly-new high-temp kiln on Craig's List for half the price of a new one, so that has met my needs. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.